Transportation of pulp, wort and wine materials is of great importance in the process of industrial winemaking. The method of transportation affects the quality of products, as in the pump itself the wort is peeled while the wort and wine material are enriched with metals.
Techno-T produces a pumping unit that transports pulp, wort, juice, juice with pulp, yeast, thick sands, wine materials, wine, grated vegetables, liquid food and chemically active media. The pump pumping with minimal impact on the product that is being pumped. The flow parts of the pump are optimized to obtain a maximum flow of uniform flow, greater heights of self-suction, reduce the "neutral" space, hence, the maximum reduction in oxidation of the product, loss of aromatics. These pump capabilities are based on the use of a non-shaft drive. This drive is a pump for the original crank-shaft design.
Stainless steel cylinder significantly reduces wear when transporting abrasive media such as diatomite, bentonite.
The free space between the pump housing and the casing allows you to quickly and qualitatively replace the sealer packing.
The stainless steel stainless steel valve of the brand 12Х18Н-10Т, equipped with stainless steel inserts, has a special surface that prevents the wear of the valves. In addition, the valve box is equipped with a bypass line, which makes it possible to clean the box in case of clogging.
The drive gear is filled with plastic grease, instead of liquid, to prevent oil leakage (contamination of the room). The gearbox is sealed with a cuff that prevents it from falling into the body of the reducing gear of the pumped product.
The pumping unit is manufactured, both in mobile and in stationary mode.
The front turning axle of the carriage is equipped with a power-operated brake - it switches off automatically, depending on the position of the handle for movement. In a stationary version, the placement of apertures under anchor bolts is the same as in PMN-28.
Specifications
Productivity, m^3/h - 32.
Pressure, MPa - 0,32.
Permissible vacuum-meter suction height, m - 4.
The ratio of the solid and liquid phases of the pumping medium is 2:8.
Operating environment temperature, °С, до - 35.
Frequency of rotation, rpm - 100.
The length of the piston stroke, m - 0,16.
Diameter of a piston, m - 0,11.
Installed capacity, kW - 7,5.
Efficiency,% - 40.
Possibility of leakage through the sealing of the stem, no more than, dm^3/h, не більше-0,1-0,2.
Overall dimensions, mm- 1700 х 800 х 1400.
Weight, kg 400.
The material is food stainless steel grade 12H18N-10Т.
| 
